2014 McLaren 650S GT3 Scores Podium Finish in Gulf 12-Hour Season Closer



 

??????????????

The McLaren 650S GT3 wrapped up its first season with a competitive 3rd place at the Gulf 12-hour race this weekend at Yas Marina.

 

2014 McLaren 650S GT3

2014 McLaren 650S GT3 14 2014 McLaren 650S GT3 15 ?????????????? 2014 McLaren 650S GT3 1 2014 McLaren 650S GT3 2 2014 McLaren 650S GT3 3 2014 McLaren 650S GT3 4 2014 McLaren 650S GT3 5 2014 McLaren 650S GT3 6 2014 McLaren 650S GT3 7 2014 McLaren 650S GT3 8 2014 McLaren 650S GT3 9 2014 McLaren 650S GT3 10 2014 McLaren 650S GT3 11 2014 McLaren 650S GT3 12 2014 McLaren 650S GT3 13

 

 

Exciting race-car news from McLaren GT today!

It looks like the P1 GTR will not be the only Macca out on the world’s sportscar racetracks next year!

 

2015-McLaren-P1-GTR-Confirmed-+-Exclusive-Rendexzcbvvring-32

The 650S GT3 upgrade has just been revealed by McLaren GT today at the Goodwood Festival of Speed.

Official Details below from McLaren GT.

 

McLaren 650S GT3 gif header

 

McLaren_650S_GT3-026 McLaren_650S_GT3-025 McLaren_650S_GT3-024 McLaren_650S_GT3-022 McLaren_650S_GT3-015

 

McLAREN GT SIGNS OFF THE 650S GT3 DEVELOPMENT PROGRAMME WITH A PODIUM FINISH AT 2014 GULF 12 HOUR

The 650S GT3 secured a hard-fought podium finish at the 2014 Gulf 12 Hour endurance race at Yas Marina Circuit over the weekend, signing off a successful and competitive year for McLaren GT.  The works factory-run effort entered two cars as part of the final stages of the intensive development programme for the 650S GT3, bringing both cars home after a gruelling 12 hours of hard racing, finishing 3rd and 12th overall. This first competitive outing underlines the performance and reliability of the latest GT model from McLaren ahead of a wider racing schedule in 2015.

The works driver line-up of Rob Bell (GB), Kevin Estre (FR) and Alvaro Parente (PT) showed a glimpse of the 650S GT3’s potential during the three phase qualifying session, securing pole position against a highly competitive and experienced grid.  This result echoed the success of the 12C GT3, which scored a pole position on its debut at the Spa-Francorchamps circuit in 2011.

Split in to two separate six hour endurance races, the Gulf 12 Hour is a true test of endurance for each car, driver and team taking part. The McLaren GT works driver line-up of #59 traded the top three places throughout the duration of both six hours events, with each of the works drivers among the quickest during each stint. As the chequered flag fell after six hours, #59 lay in 3rd while #60 was 9th in the Pro-Am class, 18th overall.

Having battled for 2nd place during the middle period of the race, Bell regained the lead going into the final two hours, to set up a grandstand finish. The closing stages saw Estre retake the lead after being consistently the quickest man on the track. As he pitted, the top three were separated by less than a minute and, as Parente strapped himself in, the only safety car period of the race ensured that the final 30 minutes would be nail-biting for each team. With the clock ticking down, the Portuguese driver chased down the leaders, making his way past back markers who were involved in their own battles lower down the field, and brought the #59 home after 315 laps, just 5.741s behind the race winner.

Pro-Am trio of Peter Kox (NL), Nico Pronk (NL) and Gilles Vannelet (FR) showed consistently strong pace throughout both races in the silver, red and black #60, working their way back up the standings after a routine pitstop saw the car rolled into the garage for precautionary checks during the opening race. Despite losing ground to the other cars in the Pro-Am class, the car then ran faultlessly for all three drivers, recovering well to claim 9th in class, and P12 overall.

Mike Flewitt, Chief Executive Officer, McLaren Automotive

‘A pole position and podium finish is a great end to the 2014 season, and really strong way to start the competitive life of the 650S GT3.  As with the 650S road car, the focus during the development programme for the 650S GT3 has been improving all areas of driver engagement and refinement, with the true performance accessible to a wider range of abilities for drivers at any level on the grid. This result is true testament to the team, both at the race and back here in Woking, with the cars proving reliable and competitive in both the Pro and Pro-Am categories.’

Andrew Kirkaldy, Managing Director, McLaren GT:

‘What a fantastic race! Both cars were on the pace, and competitive in class, and it really went down to the wire. There were close battles all the way through the field, and the last few hours were some of the most exciting racing you could wish for. For us, this event was the final stage in a rigorous development plan designed to push the cars to the limit before deliveries to customers for the 2015 season, so it is a real credit to the teams that we brought both cars home with no issues. To secure a podium with the 650S GT3 on its debut is a huge bonus for us. 

‘We would like to thank the race organisers for welcoming us to the event, and we will hopefully be back next year with some of our customer teams running.’

 

McLAREN GT UNVEILS LATEST GENERATION 650S GT3 AT GOODWOOD FESTIVAL OF SPEED 2014

27/06/14

  • GT3 evolution featuring enhanced safety and optimised handling

  • CFD developed aerodynamic package with improved cooling

  • Limited production run to premiere on the grid for the 2015 season

  • Upgrade kit available to 12C GT3 owners to extend competitive life of existing cars

In the grounds of the famous Goodwood Estate, McLaren GT has today confirmed first details of the McLaren 650S GT3 – the latest generation track-focused racer which will contest GT3 championships across the globe from the 2015 season. Building on the highly successful 12C GT3, which has firmly re-established McLaren at the front of the GT grid over the past three seasons, the 650S GT3 was unveiled in front of fans and the global motorsport media at the 2014 Goodwood Festival of Speed.

As the 12C GT3 continues claiming trophies around the world, the 650S GT3 has big shoes to fill, but it has been designed to do just that. The menacing and purposeful-looking racer is the second-generation GT3 car from McLaren GT, the GT race car building arm of McLaren, and follows in the slipstream of the 12C GT3, now competing in its third competitive season. To date, the 12C GT3 has secured three championship titles, 51 race victories and 71 further podiums, a number that continues to rise on a weekly basis, and currently leads the highly competitive Blancpain Endurance Series and the GT Asia championship. 

McLaren_650S_GT3_rear3q McLaren_650S_GT3_rear Mclaren_650S_GT3_profile McLaren_650S_GT3_mirror McLaren_650S_GT3_head-on McLaren_650S_GT3_front3q

Based on the recently unveiled McLaren 650S, and built around the same lightweight carbon fibre MonoCell chassis, the GT3 iteration has been honed using CFD technology and the latest in automotive and motorsport simulation to offer enhanced aerodynamics and improved levels of cooling. At the front, an aggressive splitter and larger air intakes dominate the purposeful new look, incorporating the familiar McLaren ‘face’ – albeit a more aggressive and menacing version, while on the flanks, the all-new lightweight carbon fibre bodywork wraps around reprofiled air intakes, which offer further optimised cooling. The fixed carbon fibre rear wing works in tandem with the large carbon fibre splitter to complete the management of air as it is worked across, through and beneath the sleek lines of the 650S GT3.

The road-going version has been designed and developed to provide ‘the ultimate in driver engagement on the road’, and the 650S GT3 uses this same approach. Revised suspension geometry, wider track and updates to the overall setup provide enhanced levels of drivability, optimising engagement for the wide range of drivers competing in GT racing. In addition, the updates have been made with added emphasis on endurance racing, pulling from the learnings over the past few years, and responding to feedback from the customer teams.

Reduced cost of ownership has been a priority during the design and development of the 650S GT3, and this has been achieved through extended component life, including increased engine and gearbox rebuild intervals, together with re-designed components and systems to reduce parts costs. Body panel design and fit have also been optimised which will not only minimise pit lane repair times but also aids weight distribution through the use of lighter components.

Increased levels of safety and refinement for the driver

Inside the cockpit, the 650S GT3 provides improved levels safety for the driver. Protection offered by the carbon fibre MonoCell chassis is further enhanced with the addition of an FIA-approved rollcage. Redesigned and lighter than that of the 12C GT3, the 650S GT3 rollcage provides a greater degree of driver comfort, with increased leg and headroom.

Another key area that has been optimised is the level of refinement, underlining the focus on endurance and driver engagement. As with its predecessor, the 650S GT3 is fitted with a bespoke motorsport digital dash display which sits behind the unique 650S GT3 steering wheel, inspired by the wheel design seen in the McLaren Mercedes Formula 1™ car. New to the 650S GT3 is a fully FIA-approved McLaren GT-developed race seat, fitted with a six-point race harness as standard. This seat offers increased levels of support and driver comfort through the use of bespoke moulded seat inserts.

The layout within the cockpit has been revised to make it even more driver-focused than previously. The seat is directly mounted to the chassis, and the steering wheel and all-new motorsport pedalbox are then adjustable to bring them closer to the driver. The centre console is also developed from the latest 12C GT3 interior, reducing complexity, and features a membrane-type switch panel for ease of use. In addition to this, improvements have been made to further optimise ventilation and driver cooling.

McLaren_650S_GT3-030 McLaren_650S_GT3-044 McLaren_650S_GT3-040 McLaren_650S_GT3-034 McLaren_650S_GT3-033

Award-winning technology, optimised cooling

The 650S GT3 is equipped with the latest generation of the award-winning, 3.8-litre McLaren V8 twin turbo ‘M838T’ engine. Race-prepared and including a McLaren-developed ECU offering increased functionality to incorporate turbo boost and transmission shift control, the engine is coupled to an all-new six-speed sequential motorsport transmission. The 650S GT3 produces around 500PS – the same power as the 12C GT3, which is controlled by the FIA’s Balance of Performance (BOP) regulations. Cooling is improved through larger 650S intakes within the front bumper and re-profiled side intakes. In addition to this, the gearbox oil cooler has been relocated, now incorporated into the larger side intakes, giving the rear of the car a cleaner, more aerodynamic flow.

Race tuned with increased grip

The 650S GT3 uses an all-new race-tuned suspension system with a 52mm wider track than the 12C GT3. The front suspension also allows the fitment of the latest generation larger diameter racing tyres . In conjunction with the optimised aerodynamic package, this provides increased levels of front-end grip and steering feel on turn-in. Newly designed forged aluminium wheels (front – 12.5” x 18”, rear – 13” x 18”) are held in place with a single wheel retaining nut on motorsport axles, while a revised hub bearing assembly and extended-life suspension components are another example of a simplified service item, and reduced maintenance costs.

Behind the new design eight-spoke wheels, and bringing the power, aerodynamics and downforce under control is a newly-developed braking system with monoblock six-piston callipers on the front, and four-piston on the rear, with ventilated discs (380 x 35mm front / 355 x 32mm rear).

12C nose GIFMclaren_650S_GT3_profile

Existing owners can upgrade

The 650S GT3 development programme has pulled significant data from the findings and lessons learned from the 12C GT3 programme. Testing of the 650S GT3 will continue throughout the summer with customer car production commencing in the autumn. Pricing for the 650S GT3 has been confirmed – £330,000 ex works, plus tax.

Existing owners of the 12C GT3 are also able to benefit from the updates and enhancements offered by the 650S GT3, due to the use of the shared chassis structure and award winning engine. This upgrade package further extends the life of existing 12C GT3 cars allowing them to continue racing competitively through a second GT racing life cycle. For many McLaren GT3 owners this allows them to race their existing car for an average of six seasons.   

Around 15 examples of the 650S GT3 are planned to be produced and delivered for the start of the 2015 season. With the optional upgrade package for 12C GT3, this could see an additional 15 cars running the new design from next season.

Mike Flewitt, Chief Executive Officer, McLaren Automotive:

‘The McLaren 650S GT3 is to GT racing what the 650S is to McLaren Automotive, with the new car improving on all areas of a strong existing product, and making it more engaging at the same time. It shares the heart and soul of its road-going sibling with the same 3.8-litre twin turbo engine and the carbon fibre chassis, but turns things up to 11 in terms of aerodynamics. It is truly fit for purpose, but is now accessible to an even wider breadth of abilities and, as with the road car, it provides unprecedented levels of comfort, safety and driver engagement.’

Andrew Kirkaldy, Managing Director, McLaren GT:

‘The 650S GT3 is a natural progression of an already successful racer, but we have looked at all the different areas where we could possibly make even the slightest incremental improvement. The revised aerodynamic profile looks much more purposeful, and we have managed to incorporate increased levels of cooling without any detriment to performance. A big step forward has also been made in terms of servicing the car, which can be the difference between a race win and finishing off the podium, and the cost of running a car at a competitive level, and this becomes more important the longer and more demanding the event. By simplifying maintenance

and repair processes, and cutting down the time and costs involved, the 650S GT3 will be even more competitive at the longer endurance events with time required in the pitlane reduced to a minimum. ‘

‘Throughout the development programme, we have focused on making the 650S GT3 even more enjoyable and engaging to drive for the wide range of drivers that are competing in GT racing around the world. With a broader envelope of performance, which is easier to access, more drivers will be able to exploit the true potential of the 650S GT3. One example is with the wider track, which gives greater levels of grip and improves handling.’

Chris Goodwin, Chief Test Driver, McLaren Automotive:

‘This is a car that is improving on a race-winning formula, and is designed and built to offer even greater levels of driver involvement, but also to be easier to drive. This is a crucial factor in any racing car, but especially with long-distance and endurance racing, where drivers can double or even triple stint, where we compete on a huge variety of circuits and where weather and track conditions vary regularly throughout a race.

‘GT racing attracts a wide variety of drivers – from the best and most experienced professionals in the world to ambitious amateurs and young developing talents. If the car is easy to drive and gives good feedback as you approach and sometimes exceed the limit, the driver will be better able to drive consistently, error free and extract more out of the car lap after lap. This is key for professional race winner as much as it is for the amateur racers that are making up increasingly large proportions of the grids around the world. It is the result of continuous development, both in terms of the work carried out by the McLaren GT design and development team, but it also takes the learnings from the thousands of laps, from countless circuits across the globe which have been completed by the 12C GT3 with our highly-successful, race winning customer teams. Real-world data and feedback from the teams gives us a much clearer understanding of what the cars go through which no simulator can provide. As such, the 650S GT3 will be just as competitive in the right hands, but more forgiving for the less experienced drivers that are being attracted to the exciting GT3 championships around the world.

 

What’s in a number? 59 – a winning pedigree

The car unveiled carries the Goodwood Festival of Speed theme of ‘addicted to winning’, with its livery including the number 59. The number was carried by the now legendary McLaren F1 GTR chassis #01R at the 24 Hours of Le Mans in 1995, and claimed victory in the gruelling test of endurance on its debut – a feat that had never been achieved previously, and has not been repeated since. Deliveries of the 650S GT3 will commence from late 2014, and the competitive debut with customer teams in GT3-homologated series will start in 2015, 20 years on from the famous race victory.

McLaren 650S GT3 Technical Specification

  • Chassis/Body

    o  McLaren carbon fibre MonoCell with aluminum front and rear sub frames

    o  Bespoke lightweight carbon fibre/composite body panels

    o  Left hand drive

    o  FIA approved safety roll cage

    o  Air-jacking system          

    o  Colour – customer choice

  • Aerodynamics

    o  Front splitter and dive planes

    o  Rear wing – fully adjustable with gurney

    o  Front and rear diffusers

  • Engine/Management

    o  Race prepared 3.8L V8 twin turbo McLaren M838T

    o  McLaren Electronics ECU incorporating turbo boost and transmission shift control

  • Transmission

    o  Six-speed sequential motorsport transmission pneumatically actuated via steering wheel mounted paddles

  • Electrical System

    o  Lightweight motorsport specification wiring and connectors

    o  Electronic power management system

    o  Membrane type switch panel

    o  Auxiliary power supplies for fitment of team equipment (radio etc)

  • Data System

    o  McLaren Electronics ‘ATLAS’ data system

    o  Motorsport digital dash display

  • Front/Rear Suspension

    o  Double wishbone adjustable for ride height, camber and toe

    o  4-way adjustable dampers with coil over springs

    o  Motorsport axles with single wheel retaining nut

    o  Adjustable anti-roll bars

    o  Forged aluminium wheels: Front 12.5” x 18”, Rear 13” x 18”

  • Steering

    o  Electro-hydraulic power assisted steering

    o  Unique McLaren GT composite steering wheel incorporating key driver switch controls and map settings

McLaren_650S_GT3_rear McLaren_650S_GT3_head-on McLaren_650S_GT3-026

  • Fuel System

    o  Motorsport ‘bag tank’ system with 125L capacity

    o  Motorsport ‘quick-fill’ system

  • Brake System

    o  Monoblock calipers with ventilated discs:

    • Front – 6 piston caliper, 380Ø x 35mm disc

    • Rear – 4 piston caliper, 355Ø x 32mm disc

    o  Bosch motorsport ABS

    o  Adjustable brake bias

  • Cockpit

    o  McLaren GT bespoke composite seat shell

    o  Six-point racing harness

    o  Motorsport pedal box – adjustable position

    o  Lightweight carbon fibre dash with integrated driver display and switch panel

    o  Motorsport fire extinguisher system

McLaren 650S GT3 gif header

About McLaren GT

McLaren GT is the GT race car manufacturing arm of McLaren Group established to develop, build and support the GT racing and track derivatives of the 12C sports car. Based in Woking, Surrey at the former home of McLaren Racing, the company is responsible for the design, development and production of the successful 12C GT3 race car, the 12C GT Can-Am Edition and the 12C GT Sprint.

McLaren Technical Partners
In the development, engineering and manufacture of the innovative and highly acclaimed 650S sports car and 650S GT3 racer, McLaren Automotive and McLaren GT have partnered with world leading companies to provide specialist expertise and technology.  These include ExxonMobil and TAG Heuer.