2016 Audi R8 LMS – New Open-Aero Design Analysis, Specs and Pricing

The new R8 is big news, of course, for supercar shoppers. Three models are set for the US range: the R8, R8 V10 and R8 V10 Plus. All sport AWD as standard and curb weights of 3500- and 3600-pounds.

America will miss out on the limited-release R8 E-Tron but we will definitely see the fifth family member: the nearly unbeatable 2016 R8 LMS.

This factory racecar is already outselling the existing model among dozens of top-tier sportscar racing teams. The reasons are simple: it is faster than ever thanks to cunning new aero and mechanicals.

The biggest changes versus the V10 Plus road cars? Two major things:

— the LMS is rear-drive only versus the standard 40:60 quattro torque split for all other R8s.

— the LMS is MASSIVELY lighter: just 2700-pounds makes its 585-horsepower feel like 1000+.

The aero package is intense: this is basically a shell racecar when it comes to the bodywork. 50-percent of the overall R8 parts are said to be shared across the road/race divide… but that is mostly a nominal figure.  The bodywork, for example, is now fully CRFP versus the aluminum of the road car for every panel except the roof.

So many things from the original R8 are just chucked wholesale — including the entire front subframe, now sporting new crash structures and extreme downforce from lower overall speeds. It is sucked down to the pavement harder than ever, and without crossing 100-mph or so. The new aerokit will start working hard from just 60-mph or so.

Interesting details on the nose, with sliced front fenders and a unique vacuum-effect piece for the upper hood. There is a sharp upward spoiler ahead of the windshield and cabin compartment. The aero theory is to create a suction effect. The negative pressure point pulls air up from the main intake channels of the mostly-solid nose.

Audi before race debut of the Audi R8 LMS and first 24-hour races of the GT season

The new nose lets the cabin ventilation improve radically versus the current LMS car. Other driver-comfort tweaks include individual adjustments for the pedals and steering wheel, plus a much-lighter and quicker six-speed sequential transmission.  Not just kind additions for fatcats — this endurance racer is a long-term home for drivers, and needs to be comfortable to avoid stressing their muscles and joints over hours of racing heat.  Comfort = podiums!

Around the profile and into the tail, you can really see how all the new CFRP panels give massive room to pull air through their radiators, over the brakes and into the engine in back.

New rear fender treatments hang the outer bodywork far from the main silhouette of the R8. These free-standing wings and the new-shape tail are multi-functional: aiding the underody downforce ground effects and also venting huge heat from the engine.

The all-new aero is likely the single biggest improvement: the drag coefficient is down 20-percent versus the current R8 LMS — even while upping the downforce dramatically.  A smaller rear wing delivers the stickiness in back this year — and is sleeker for higher overall V-maxes.

Pricing and global sales of the R8 LMS are open now: $400k buys you the most intimidating GT3 car on any racetrack in 2016. $50k more and they will fill another DHL aircrate full of parts!


2016 Audi R8 LMS

Innovation Forum 2015


The new Audi R8 LMS

Technical data Audi R8 LMS (2016*)


Version: February 2015
Model Audi R8 LMS (2016)
Vehicle type Sports car complying with FIA GT3 regulations
Chassis Audi Space Frame (ASF) in aluminium-CFRP hybrid construction with
stressed steel roll-cage, bodywork parts from CFRP and aluminium
Safety concept Energy absorbing aluminium and CFRP crash structures front and rear.
Safety concept fulfils FIA LMP1 crash requirements.
Audi Sport PS 1 safety seat
Type 90 degree V10 engine, 4 valves per cylinder,
DOHC, gasoline direct injection,
emission control by two exhaust gas race catalytic converters
Engine management Bosch Motorsport Motronic MS6.4
Engine lubrication Dry sump
Cubic capacity 5,200 cc
Power Variable by restrictor up to 430 kW (585 hp)**
Torque Over 550 Nm
Transmission type Rear wheel drive, traction control (ASR)
Clutch Electro hydraulically activated 3-plate race clutch (ECA)
Gearbox Sequential, pneumatically activated 6-speed racing gearbox
with paddle shift
Differential Limited-slip rear differential, variable preload
Driveshafts Constant velocity joints
Steering Servo assisted rack and pinion steering
Suspension Front and rear independent suspension. Double wishbones,
damper struts with coil springs and adjustable dampers
as well as adjustable front and rear anti-roll bars
Brakes Hydraulic dual circuit brake system,
steel brake discs front and rear, race ABS
Wheels Forged aluminium wheels,
front 12.5 x 18 inch, rear 13 x 18 inch
Tyres Front 30-68/18, rear 31-71/18
Length 4,583 mm
Width 1,997 mm
Height 1,171 mm
Homologation weight 1,225 kg
Fuel tank capacity 120 l
Fire extinguisher system Audi Sport
Controls Height and length adjustable safety steering column,
quick adjust rail mounted pedal box
Seat system Audi Protection Seat PS 1


  • Market launch 2016
  • Determined by BoP of event organisers

Paul Ricard Photo Credits: Endurance-Info.com




Tom Burkart is the founder and managing editor of Car-Revs-Daily.com, an innovative and rapidly-expanding automotive news magazine.

He holds a Journalism JBA degree from the University of Wisconsin – Madison. Tom currently resides in Charleston, South Carolina with his two amazing dogs, Drake and Tank.

Mr. Burkart is available for all questions and concerns by email Tom(at)car-revs-daily.com.

2016airanalysisAudiBelgian Audi Club Team WRTCFRPDesignGT3ISRlargeLMSMakingNewOpen-Aeror8RaceRacingSaintelocSebastian Loeb RacingTeam Parker RacingTeam WRTWEC