From afar, you’d swear it’s a Ford pickup straight out of the 1950s. But up close, this Ford F‑100 hides something far more radical: an 800‑hp supercharged V8, a modern sports-car chassis, and a finish that no longer resembles the original 1956 utility vehicle. This extreme restomod, conceived in the United States, required more than 15,000 hours of work. A figure that immediately sets the scale of the project.
Designed and built by the Fat Fender Garage, based in Arizona, this unique pickup is on display at the SEMA Show. The Las Vegas show has become the American temple of over-the-top builds. Commissioned by American collector Tony Peressini, this Ford F‑100 GT/FX is a one-off piece with no commercial intent. It sits on an entirely new chassis. The objective is to bring the spirit of a 1956 F‑100 closer in attitude to that of a modern Ford GT, according to its creators. With a 800‑hp supercharged V8 and more than 1,015 Nm of torque, this pickup steps into a different category. That’s a little over 1,000 Nm. The budget is estimated at more than a million dollars, i.e., just over €900,000. This pickup becomes as much a showcase of craftsmanship as a collectible object. All the more meaningful given the 15,000 hours invested in the project.
Ford F-100 GT/FX: An 800‑hp Coyote V8 and a Worked Chassis
Technically, the Ford F‑100 GT/FX bears little resemblance to the 1956 pickup. Fat Fender Garage kept the spirit alive, but almost everything else was rebuilt around an in-house FF1 Performance Coilover Chassis. Under the hood sits a 5.0‑liter Coyote V8 paired with a Whipple 3.0‑liter supercharger. The setup delivers 800 hp and about 1,015 Nm of torque, routed to the rear wheels only. Transmission is a Ford 10‑speed automatic.
Much of the more than 15,000 hours of development focused on the chassis and running gear. The pickup rides on FF1 coilovers. According to the tuner, they’re meant to deliver a handling character close to that of a modern supercar. That’s the promise Fat Fender Garage makes, as quoted by Carscoops.
To manage the 800 hp, the machine also wears substantial Wilwood brakes. The front calipers are six‑piston units and the rears four‑piston units. The system is complemented by HRE wheels wrapped in Toyo Proxes Sport 2 tires.
A Handcrafted Body and a GT‑Grade Interior After 15,000 Hours of Work
On the outside, every body panel was hand‑fabricated in steel. The front and rear fenders are widened, and the grille is bespoke, featuring modern lighting and large air intakes. Lowered suspensions visually press the pickup to the ground. A rear diffuser borrowed from the Ford Mustang GT350 and a substantial front splitter complete the aero kit. Stainless steel side steps and bumpers are also unique to this project. The silver‑gray paint, leaning toward champagne, is crossed by two black racing stripes running the length of the vehicle.
Fat Fender Garage notes that the design and construction of this F‑100 required more than 15,000 hours. The timespan stretched over several years of work for their teams. The interior received the same level of care as the sheet metal, with bucket seats and a fully new leather interior. The instrumentation is modern, but the air conditioning and comfort controls are concealed in the dashboard to preserve the vintage vibe. There are also power windows and a premium audio system. It’s going to need to be as tough as the engine’s soundtrack to keep up. “GT/FX demonstrates how far we can push a classic pickup. We wanted to bring the attitude of a Ford GT to a 1956 F‑100 and carry that idea into every aspect of the project. This pickup represents the culmination of everything our team has learned and built over the years. From the chassis and interior to the performance systems, nothing has been left untouched. The fabrication, painting, and final assembly all received the same level of care. GT/FX brings Fat Fender Garage’s entire ecosystem together in a single vehicle,” explains Jason Noel, founder of Fat Fender Garage.